ARRI ARRIFLEX 416 - Manual (Page 174)


1
• Using the “MODE“ key a photo switch to Mode 4
(Timecode time)
• Plug the cable with the TC signal into the “TCC“ socket
a photo . The last two entries on the indicator show a
blinking “EC“ (external code). If the LTC signal is
correctly transferred the indication “CC“ (correct code)
appears for approx. 10 second before the indicator on
the generator frame rate switches back.
Note: The CCU is no longer supported and cannot be
used for setting Timecode.
Increased accuracy of the TC Generator
The ARRIFLEX 416 TC generator has a new feature to extend
the time period required between synchronizations. The
camera must be connected to an Ambient Clockit as the
master clock. The Ambient Clockit measures the frequency
of the 416 TC output, calculates the difference to its own
internal clock and puts out an adjustment value to the 416
TC generator.
Timecode
MODE button
TCC socket