Mounting the obb-2, Removing the obb-2, Power supply – ARRI ARRIFLEX 416 User Manual

Page 31

Advertising
background image



1

1

The OBB-2 contains Lithium-Ion cells. The

equivalent Lithium content is less than 8 grams.

Tested according to UN manual of test and

criteria chapter 38.3.

To reduce the risk of fire burns do not

disassemble, crush, puncture or short external

contacts.

Do not dispose of in fire or water.

Do not expose to temperatures above 60°C.

Use specified charger only.

Charge: 0°C to 40°C.

Discharge: -20° to +50°C.

Remove from camera when discharged, during

transport and in storage.

Check the current regulations regarding trans-

portation of Lithium-Ion batteries with your carrier.

Mounting the OBB-2

• Fit the power plug of the OBB-2 into the camera power

connector and slide the battery forward

a

photo

.

Removing the OBB-2

• Hold the OBB-2 and press the on-board battery

release button

a

photo

.

• Pull the battery backwards until the power connectors

disengage.

OBB-2

release button

Power

Supply

Advertising