ARRI ARRIFLEX 416 - Manual (Page 9)


 
Specific safety instructions
Never run the camera without a lens or a
protective cap in the lens mount receptacle!
Never operate the magazine release mechanism
while the camera is running!
As the iris ring end-stops of the ARRIMACRO
lenses move when the lens is focussed,
the ARRIMACRO lenses must not be used with
the ARRI Wireless Remote System (WRS) or the
Lens Control System (LCS).
There is danger of injury with rotating drive
gears on the lens barrel, or when switching the
operating direction of the 416 PLUS, UMC-1
and UMC-3 motor drives!
Any violation of these safety instructions or the non-
observance of personal care could cause serious injuries
(including death) and damage to the system or other
objects.
Note: Notes are used to indicate further information
or information from other instruction manuals.
a photo indicates objects, which are shown in the
illustration.
Product Identification
When ordering parts or accessories, or if any questions
should arise, please advise the model type and serial
number of the product in question.
Safety
In
str
uction
s