ARRI ARRIFLEX 416 - Manual (Page 99)


 
10.3.7 Changing Format marking number
The IVS can insert different format markings. It is possible
to have
• no format marking (OFF),
• format marking number one (1),
• format marking number two (2)
• or both format markings at the same time (1 & 2) on display.
Using the Keypad
The adjustment of the different format markings
can only be done via the on-screen display as
described in chapter 10.4.6 Format Marking
Menu. However, it is possible to select which
format markings are displayed via the keypad.
The format marking selection is only possible when the
White Balance manual mode is not active (when the WB
MAN LED is not flashing). If white balance manual mode
is active, please wait for more than 5 seconds without
pressing any key to leave this mode.
• The key Í will switch from OFF, 1, 2 to 1&2. The key
Ì will switch in the opposite order.
Video-A
ss
is
t-Sy
stem