ARRI ARRIFLEX 416 - Manual (Page 206)


0 0
External Synchronization Unit ESU-1
The external synchronization unit ESU-1 a photo can be
used with the ARRIFLEX 416 as well as with the 235, the
435 models, 535, 535B and 16SR 3/Advanced. It allows
the camera to be synchronised to other equipment such as
TV monitors. By means of a BNC-socket, it is possible to
synchronize to an external standard video signal (50/60 Hz)
or, through an inductive pickup, to a CRT type monitor.
The camera display shows “ESU” in the upper line. The
ESU-1 can be used for frame rates from 3 to 60 fps.
The frame rate is indicated on the camera display in Mode 2.
A phase shifter and a pilot tone generator have also been
integrated into the external synchronization unit. The phase
relationship of the synchronization is retained even when
the camera is switched off.
See TECHN. INFORMATION “External Synchronization
Unit ESU-1”.
• To connect the ESU cable to the camera, the 235/416
Accessory Expansion Cable KC-88-s has to be connected
to the camera’s “REMOTE“ socket. The ESU cable is then
connected to the accessory expansion cable. The RCU-1
can be connected to the other socket of the accessory
expansion cable.
Acce
ss
orie
s
REMOTE socket