ARRI ARRIFLEX 416 - Manual (Page 166)


1
VITC
This sub menu line switches the insertion of VITC on (ON)
and off (OFF).
• Move the cursor > with the Ê and Ë keys to the line
– VITC. The Í and Ì keys switch the insertion on and off.
Position 1
The insertion of VITC can be on single or multiple lines
between lines 6 and 22. If the same line number is
selected on both position 1 and position 2, the insertion
will be single line; otherwise it will be multiple lines. The
value of position 1 can be higher or lower than that of
position 2.
• Move the cursor > with the Ê and Ë keys to the line
– POSITION 1. By pressing the Í key the value will be
increased until line 22 is selected. By pressing the Ì
key the value will be decreased until line 6 is reached.
MENU VITC LINE
-> - VITC LINE ON
- POSITION 1 10
- POSITION 2 12
- EXIT
Video-A
ss
is
t-Sy
stem
MENU VITC LINE
- VITC LINE ON
-> - POSITION 1 10
- POSITION 2 12
- EXIT