ARRI ARRIFLEX 416 - Manual (Page 78)


 
10.2.2 Cabling
Outputs
If it is intended to use composite outputs but it is
not known whether the BNC connectors are
switched to composite or to Y/C, connect the cable
expecting the composite signal to the É/Y
connector first and check the settings (BNC OUT
VBS or Y/C) in the menu video/text adjust. Please
see next chapter Composite Video Outputs.
The IVS has two BNC sockets, which can be switched to
output two independent composite signals or one Y/C
signal. Additionally, there are two outputs for a mini-
monitor and wireless video transmitter.
Video-A
ss
is
t-Sy
stem
È /C É /Y