CiDRA SONARtrac PW VF-100 - Manual (Page 201)

20836-01 Rev 04 Page 10-7
10.4 Load Configuration
Load Configuration is a one-step command used to upload a
configuration file to the transmitter from the USB memory stick.
In Load Configuration mode the transmitter will only load files with a
file name consisting of the last four digits of the transmitter serial
number followed by ’_LoadConfig.ini’. For example, a configuration
file for transmitter serial number 0000234 must be named
‘0234_LoadConfig.ini’ for it to be recognized and uploaded by this
utility. The Advanced Functions menu allows for loading of
alternatively named configuration files.
10.5 Advanced Functions
Advanced Functions provides the user with a menu of options for
saving data to and uploading data from the USB memory stick. It also
allows for updating system firmware and managing files on the USB
memory stick, and setting the date and time in the transmitter. These
options are discussed below.
10.5.1 System Config
System Config function allows naming, saving and loading
configuration files. (In Snapshot mode a configuration file is
automatically saved.)
File For Save allows the user to give a custom name to the file. If
this option is not selected the file will be saved using the
transmitter serial number and a date / time stamp.
Save Config saves the file using the name previously specified.
Load Config allows the user to load a configuration file from a list
of ‘.ini’ files. Note that files do not have to be ‘transmitter serial
number specific’, as they must be when using the Load
Configuration function.
10.5.2 Raw Data
Raw Data function allows the user to download Raw Data from the
system. (In Snapshot mode a 5-minute Raw Data file is automatically
created.)
Duration allows the user to select options of 1, 5, 10, 30, 60, 120
and 240 minutes of continuous raw data.
Save is used to save the Raw Data files.