CiDRA SONARtrac PW VF-100 - Manual (Page 6)

20825-01 Rev 07 Page 1-4
1.7 Passive Sonar EC Declaration of Conformity
The EC Declaration of Conformity provides the justification for the CE
marking of a product. It identifies all of the EC Directives that apply to
the product along with the Standards that the product was designed to or
tested against to demonstrate compliance with those directives. CE
marking is a requirement only for products sold in the European
community.
The EC Declarations of Conformity are shipped with the SONAR process
monitoring system. There are two separate EC Declarations of
Conformity (D of C). The first is for passive sonar products with model
numbers and markings for use in ATEX Class I, Zone 2 Hazardous
areas. That D of C includes mention of the ATEX Directive. The second
D of C is for passive sonar products without markings for use in ATEX
Class I, Zone 2 Hazardous areas. The second D of C does not mention
the ATEX Directive.
The Declarations of Conformity can be distinguished by looking at the
Transmitter and Sensor Head model numbers listed at the top of the
form at “Product Identification”.