CiDRA SONARtrac PW VF-100 - Manual (Page 9)

20827-01 Rev 06 Page 2-1
2
EQUIPMENT SAFETY COMPLIANCE
Table of Contents
2 EQUIPMENT SAFETY COMPLIANCE ............................................................................ 2-1
2.1 Safety ...................................................................................................................... 2-1
2.2 North American Emissions....................................................................................... 2-1
2.3 European Emissions and Immunity .......................................................................... 2-1
2.4 CE Marking ...............................................................................................................2-2
2.1 Safety
This equipment is listed with TÜV Rheinland of North America, Inc., a
nationally recognized testing laboratory, and certified for ordinary
location use per the following US, Canadian, and European standards:
UL 61010A-1, CSA C22.2 No. 1010, and IEC/EN 61010.
If so marked, this equipment is certified by Underwriters Laboratories
for use in areas that - under fault conditions - includes explosive gas
atmospheres as defined by Class I, Division 2, Groups A, B, C, and D
per compliance with these US and Canadian standards: UL 1604,
ANSI/ISA12.12.01, UL 508, CSA C22.2 No. 213, and CSA C22.2 No.
142.
If so marked, this equipment is certified by UL/DEMKO for use in
areas that - under fault conditions - includes explosive gas
atmospheres as defined by ATEX Class I, Zone 2 Group IIB per
compliance with EN60079-11, EN60079-15.
The SONAR PROCESS MONITORING SYSTEM SUPPLEMENT
FOR ATEX ZONE 2 SAFETY provides additional information for
ATEX Class I, Zone 2 installations and takes precedence over this
manual.
2.2 North American Emissions
This equipment is compliant with Class A limits for radiated and
conducted radio noise emissions, as defined in Subpart A of Part 15 of
the FCC rules, as well as the requirements defined in ICES-003 for
Canada.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.
2.3 European Emissions and Immunity
This equipment is compliant with the requirements set forth in EN
61326-1, Electrical Equipment for Measurement, Control and