CiDRA SONARtrac PW VF-100 - Manual (Page 203)

20836-01 Rev 04 Page 10-9
10.6 USB Memory Stick
– Basic Functions
The following sections provide instructions on the use of the USB
memory stick. The Basic Functions menu enables the user to collect
a Snapshot and to Load Configuration files. Additional capabilities are
provided in the Advanced Functions section.
10.6.1 Save Snapshot
The purpose of the Snapshot file is to collect system information that
will be used to optimize the system performance. A Snapshot will:
Collect one day of Data History (information stored in the
transmitter)
Collect 5 minutes of Raw Data (unprocessed sensor data)
Collect System Info (pipe size, input and output setup, etc.)
Collect Configuration Data (system parameters)
Collect Event Log Data
Create a .zip file of the data collected
To collect a Snapshot, insert the memory stick into the USB port.
Once the memory stick is recognized by the transmitter the following
screen will appear.
Figure 1 Snapshot Save Screen
Press ‘ENTER’ on the keypad and the following screen will appear.
Figure 2 Snapshot Save Warning Screen
Press ‘ENTER’ on the keypad to continue and run the Snapshot or
press ‘EXIT’ to return to the previous menu.