CiDRA SONARtrac PW VF-100 - Manual (Page 204)

20836-01 Rev 04 Page 10-10
The Snapshot will take about 13 - 15 minutes to download and save to
the memory stick.
Once the Snapshot is complete the following screen will be displayed.
Figure 3 Snapshot Save Complete Screen
The memory stick can be removed and the transmitter will return to
normal operation.
If ‘ENTER’ is selected the transmitter screen will return to the Save
Snapshot Screen and another Snapshot can be taken, or the memory
stick can be removed and the transmitter will return to normal
operation.
To summarize the Snapshot procedure:
Insert the memory stick in the USB Port.
When Figure 1 appears press ‘ENTER’.
When Figur
e 2 appears press ‘ENTER’.
When Figure 3 appears, remove the memory stick or press
‘ENTER’ and scroll to additional menus.
10.6.2 Load Configuration
Load Configuration is used to load a new configuration file into the
transmitter. To use this command, the configuration file MUST have
the specific name of ssss_LoadConfig.ini where ssss is the last four
digits of the transmitter serial number (found on the inside cover of the
transmitter). For example, in order for the Load Configuration menu
item to recognize the file to be loaded into transmitter Serial Number
0000355, the file MUST be named 0355_LoadConfig.ini. If that file
name is not found an error message will appear. However, the new
configuration file can still be loaded as described in the Advanced
Functions portion of this document.