2 ‘load’ config files, 2 advanced functions – ‘raw data, Load’ config files -14 – CiDRA SONARtrac PW VF-100 User Manual
Page 208: Advanced functions, Raw data’ -14
20836-01 Rev 04
Page 10-14
10.7.1.2
‘LOAD’ Config Files
To ‘LOAD’ a configuration file from the memory stick to the
transmitter:
Insert the memory stick in the USB Port.
Once the ‘Save Snapshot’ screen appears press the ‘↓’ key two
times. ‘Advanced Functions’ will appear on Line 1 of the display.
Press the ‘ENTER’ key and ‘→System Config’ will appear on Line
2 of the display.
Press the ‘ENTER’ key and ‘→File For Save’ will appear on Line 3
of the display.
Press the ‘↓’ two times and ‘→Load Config’ will appear on Line 3
of the display.
Press the ‘ENTER’ key and Line 4 will become active. Use the ‘↑’
and ‘↓’ arrow keys to scroll to the desired Config File.
Press the ‘ENTER’ key and a warning will be displayed.
Press the ‘ENTER’ key a second time a second warning will be
displayed.
Press the ‘ENTER’ key a third time and the configuration file will
load and the ‘Load Complete’ screen will be displayed.
Remove the memory stick to resume normal system operation or
press ‘ENTER’ to return to the menu.
10.7.2
Advanced Functions
– ‘Raw Data’
Raw data is as the name implies, raw sensor output data that is used
by the transmitter or by Technical Support Personnel. To download
raw data from the process monitoring system to the memory stick:
Insert the memory stick in the USB Port.
Once the ‘Save Snapshot’ screen appears press the ‘↓’ key two
times. ‘Advanced Functions’ will appear on Line 1 of the display.
Press the ‘ENTER’ key and ‘→System Config’ will appear on Line
2 of the display.
Pre
ss the ‘↓’ key and ‘→Raw Data’ will appear on Line 2 of the
display.
Press the ‘ENTER’ key and ‘→Duration’ will appear on Line 3 of
the display.
Press the ‘ENTER’ key and ‘1 Minute’ will appear on Line 4 of the
display. Press the ‘ENTER’ key and then use the ‘↓’ key to scroll