CiDRA SONARtrac PW VF-100 - Manual (Page 75)

20832-01 Rev 05 Page 6-9
6.3.2 Transmitters With Pluggable Terminal Blocks
The following figure illustrates the basic power and signal connections
for transmitters with pluggable terminal blocks.
The recommended torque for the terminal screws is 4.4 to 5.3 lb
f
-inch
(0.5 to 0.6 Nm).
The recommended torque for the screws that secure the terminal
blocks to the base is 3.5 to 4.4 lb
f
-inch (0.4 to 0.5 Nm).
Figure 4 Power and Signal Interconnects
User I/O
connections Sensor I/O
connections Power
connections Sensor head
power fault
LED