Rockwell Automation 1336 8A-48A Fiber Industry - Manual (Page 142)

C–2 CE Conformity
Filter Selection
Filter Catalog
Number Three-Phase
Volts
Used with . . .
Frame
Reference
1336-RFB-16-A 200-240V 1336S-AQF15 - AQF20 A2 1336 RFB 16 A
380-480V 1336S-BRF30 - BRF50 A2-A3
1336-RFB-30-A 200-240V 1336S-AQF30 - AQF50 A3 1336 RFB 30 A
380-480V 1336S-BRF75, BRF100 A4
1336-RFB-27-B 200-240V 1336S-A007 B 1336 RFB 27 B
380-480V 1336S-B007 - B015 B
1336-RFB-48-B 200-240V 1336S-A010 - A015 B 1336 RFB 48 B
380-480V 1336S-B020 - B030 B
EMC Enclosure Kit Selection
Frame
Enclosure Kit Catalog Number
Frame
Reference
200-240V Rating 380-480V Rating 500-600V Rating
A2, A3 1336S-AE3 1336S-AE3 –
A4 1336S-AE2 1336S-AE2 1336S-AE2
B 1336S-AE4 1336S-AE4 1336S-AE4
RFI Filter Installation
Important: Refer to the instructions supplied with the filter for details.
The RFI filter must be connected between the incoming AC supply
line and the drive input terminals.
RFI Filter Leakage Current
The RFI filter may cause ground leakage currents. Therefore a solid
ground connection must be provided as shown below.
!
ATTENTION: To guard against possible equipment
damage, RFI filters can only be used with AC supplies
that are nominally balanced and grounded with respect
to ground. In some installations, three-phase supplies
are occasionally connected in a 3-wire configuration
with one phase grounded (Grounded Delta). The filter
must not be used in Grounded Delta supplies.
Filter