Rockwell Automation 1336 8A-48A Fiber Industry User Manual
Page 54
3–14
Human Interface Module
Password Mode
(continued)
Login to the Drive
or
or
2. The Program/EEProm modes and the
Control Logic/Clear Queue menus are now
password protected and will not appear in
the menu. To access these modes, perform
the following steps.
A. Press the Increment (or Decrement)
key until “Password” is displayed.
B. Press Enter. “Login” will be displayed.
C. Press Enter, “Enter Password” will be
displayed.
D. Press the Increment (or Decrement)
key until your correct password is
displayed. With a Series A (version
3.0) or Series B HIM, the SELect key
will move the cursor.
E. Press Enter.
F. The Program and EEProm modes will
now be accessible. To prevent future
access to program changes, logout as
described in step 1.
Choose Mode
Password
Enter Password
< 0>
Enter Password
< 123>
Choose Mode
Password
Password
Login
Logout from the Drive
or
or
3. To prevent unauthorized changes to
parameters, Logout must be performed as
described below.
A. Press the Increment (or Decrement)
key until “Password” is displayed.
B. Press Enter.
C. Press the Increment (or Decrement)
key until “Logout” is displayed.
D. Press Enter to log out of the Password
mode.
Choose Mode
Password
Password
Login
Password
Logout
Choose Mode
Password