Rockwell Automation 1336 8A-48A Fiber Industry - Manual (Page 52)

3–12 Human Interface Module
or
(continued) Control Status Mode
Fault Queue/Clear Faults
or
or
or
2. This menu provides a means to view the
fault queue and clear it when desired.
A. From the Control Status menu, press
the Increment (or Decrement) key until
“Fault Queue” is displayed.
B. Press Enter.
C. Press the Increment (or Decrement)
key until “View Faults” is displayed.
D. Press Enter. The fault queue will be
displayed. “Trip” displayed with a
fault will indicate the fault that tripped
the drive.
E. Use the Increment (or Decrement) key
to scroll through the list.
F. To clear the fault queue, press ESCape.
Then use the Increment/Decrement
keys to select “Clear Queue.” Press
Enter. Please note that “Clear Queue”
will not clear active faults.
Control Status
Fault Queue
Fault Queue
View Faults
Serial Fault
F 10 Trip 1
Reprogram Fault
F 48 2
Fault Queue
Clear Queue