Rockwell Automation 1336 3-20HP FRN 1.01-3.01 - Manual (Page 32)

Specifications
Chapter 4
4-5
Output Power
Waveform: Sine coded pulse width modulated waveform.
Voltage: B003-B200
0 to applied input voltage, 380V AC, 415V AC, or 460V
AC (maximum output voltage cannot exceed applied input
voltage).
C003-C200
0 to 575V AC
(maximum output voltage cannot exceed applied input
voltage).
Frequency Range: 0 to 250Hz with programmable minimum and maximum
limits.
Frequency Digital —
Resolution: Preset speeds (serial interface or pulse train input) to
0.005Hz of set frequency within the minimum and
maximum limits.
Analog —
Equal divisions between minimum and maximum limits to
the nearest 0.005 Hz as a function of signal type.
Local speed pot (MOD-FA2 only), 1003 divisions.
Remote speed pot (TB2, Terminals 1, 2 and 3).
514 divisions for Main Control Board Firmware Versions
1.01 and 1.10.
633 divisions for Main Control Board Firmware Versions
1.11-2.01.
0 to 10V DC input (TB2, Terminals 4 and 5), 976
divisions.
4 to 20mA input (TB2, Terminals 4 and 6), 726 divisions.
Frequency Digital Frequency Source: 0.0013% of set frequency,
Regulation: 0 to 40
°
C ambient temperature range.
Volts-per-Hertz: Fully programmable.
– Minimum 1 to 14.3V/Hz through local programming.
– Wider ranges available through optional programming.