Rockwell Automation 1336 3-20HP FRN 1.01-3.01 - Manual (Page 82)

Startup
Chapter 9
9-4
Initial Operation Step 9a
- Motor Disconnected (cont.)
The P
R
portion of the Programming and Display Panel will indicate the
speed source currently being used. Verify that the drive will accept the
required speed reference sources.
Freq P R
Are preset speeds to be used?
No – Go to Step 9b.
Yes – Select preset Speed 1. Select preset Speed 5.
Display must be - 7. Display must be - 9.
Select preset Speed 2. Select preset Speed 6.
Display must be - 8. Display must be - 9.
Select preset Speed 3. Select preset Speed 7.
Display must be - 9. Display must be - 9.
Select preset Speed 4.
Display must be - 9.
Open all preset speed inputs.