Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 103)

Quantity One User Guide
4-6
Fig. 4-6. Adjusting the anchor points of the lane frame.
Removing/Unadjusting Anchors
To remove an anchor point, select Unadjust Anchors from the Edit Frame submenu
or toolbar and click on the anchor. The anchor will disappear and the adjusted lanes
will straighten out.
4.1.c Single Lanes
You can define individual lanes using the single lane tools. These are located on the
Lane > Single Lane submenu or on the Lane toolbar.
New anchor points
New anchor lines