Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 57)

Quantity One User Guide
3-6
Plot Cross-section
Select Plot Cross-section and click or drag on the image to display an intensity trace
of a cross-section of the gel at that point. The horizontal trace is displayed along the
top of the image, and the vertical trace is displayed along the side of the image.
The intensity at the point you clicked on is displayed, as is the maximum intensity
along the lines of the cross-section.
Fig. 3-4. Plot Cross-section tool.
Plot Vertical Trace
Select Plot Vertical Trace and click or drag on the image to plot an intensity trace of
a vertical cross-section of the image centered on that point.
3.3 Showing and Hiding Overlays
To conceal all plots, traces, info boxes, and overlays on an image, select Hide
Overlays from the main toolbar or View menu.
Click on button, then
click or drag on the image.