Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 60)

Chapter 3. Viewing and Editing Images
3-9
Fig. 3-6. Selecting images to display in the viewer.
To reassign the different images to different channels, use the pulldown buttons to the
right of the name fields. Select <clear> from the pulldown list to remove an image
from that channel of the viewer.
Viewing Options
To remove a particular color channel from the display, click in the checkbox
associated with that channel to deselect it.
Select the Auto-Scale Image When Assigned checkbox to automatically adjust the
brightness and contrast of each loaded image based on the data range in the image.
This invokes the Auto-scale command from the Transform dialog (see section 3.8,
Transform) when an image is first opened in the viewer. Note that this setting affects
only how the image is displayed in the viewer, not the actual data.
Note: If you deselect this checkbox, any images currently displayed will remain auto-
scaled. Click on the Transform button in the viewer and click on the Reset
button in the Transform dialog to undo auto-scaling.
Buttons for various viewing tools are included in the Multi-Channel Viewer. Tools
such as Zoom Box and Grab will change the display of all the images in the viewer at
once.
Click on the Transform button to open the Transform dialog. In the dialog, you can
adjust the display of each channel independently by selecting the appropriate channel
option button. Similarly, the Plot Cross-section command will report the intensity of
each channel separately.