3 volume standards, Volume standards -7 – Bio-Rad Quantity One 1-D Analysis Software User Manual
Page 182
Chapter 7. Volume Tools
7-7
Each selected volume will have a green border.
•
To move the selected volume or volumes, position the cursor over the selection
and drag.
•
To copy within an image, hold down the Ctrl key while dragging the selected
volume or volumes. The copy will be created and dragged to the new position.
•
To delete the selected volume or volumes, press the Delete key.
•
To copy between images, click on the Copy to Clipboard button on the Volume
toolbar, then open or select the image you want to copy to and click on the Paste
from Clipboard button. The copied volume(s) will be pasted into the new image
in the same relative position it was copied from.
Note:
If you are copying to an image with a different pixel size (i.e., resolution), you
will receive a message that the placement of the copy may not be exact. Click on
OK to complete the paste, then position the pasted objects manually.
7.3 Volume Standards
You can use volumes of known concentration to calculate the concentrations of
unknown volumes.
To classify a particular volume as a standard, double-click on it. This will open the
Volume Properties dialog.