Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 175)

Quantity One User Guide
6-32
Fig. 6-26. Checking an imported calibration curve.
When you enter the band’s value, its status will change to Check, indicating that it is
used to verify the accuracy of the calibration curve and is not used in calculating the
curve itself.
Click on the Show Curve button to display the graph, and note that the Check bands
are enclosed in diamonds. If the Check bands do not fall on or very near the
calibration curve, we recommend that you do not use the imported standards for this
gel.
Band used
to check
curve