D.2 step i. select application – Bio-Rad Quantity One 1-D Analysis Software User Manual
Page 293
Quantity One User Guide
D-4
The control panel has been arranged from top to bottom to guide you through the
acquisition procedure. There are four basic steps to scanning an image using the GS-
700:
1.
Select the application.
2.
Select the scan area.
3.
Select the resolution of the scan.
4.
Acquire the image.
D.2 Step I. Select Application
To set the parameters for your particular scan, you can:
1.
Select from a list of possible applications, or
2.
Choose your own filter and light source settings.
Selecting from the List of Applications
When you select from the list of applications, the software automatically sets the
appropriate filter(s) and other parameters for that particular application.
To select from the list of applications, click on the Select button under Select
Application.
Fig. D-3. Example of the application tree in the GS-700 dialog box.