Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 356)

H-1
Appendix H
Fluor-S MAX MultiImager
Fig.H-1. Fluor-S MAX MultiImager.
Before you can begin acquiring images using the Fluor-S
®
MAX MultiImager, the
imaging system must be properly installed and connected with the host computer. See
the Fluor-S MAX hardware manual for installation, startup, and operating
instructions.
Note: Make sure that the temperature light on the Fluor-S MAX is green before
attempting to capture an image. If you are using a PC, the Fluor-S MAX should
be turned on and the initialization sequence completed before the host computer
is turned on. See the hardware manual for more details.