Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 91)

Quantity One User Guide
3-40
Fig. 3-25. Text Overlay Properties dialog.
To enter text, type in the main field. Use the buttons in the dialog to select the
properties of the text, including format, alignment, and justification.
Select the font style, font size, color of the text, and color of the background in the
text box using the pull-down lists.
After you have typed the text, click on OK. The text will appear on the image at the
spot where you originally clicked.
Editing a Text Overlay
To edit a text overlay, make sure the Text Tool or Select Tool is selected, and then
double-click on the overlay to open the Text Overlay Properties dialog. The existing
text will be displayed and can be edited.
Line Tool
You can use the Line Tool to draw a line between text and an image feature, or
between any two points of interest on the image.
Click on the Line Tool button, then drag on the image to create the line.
To resize or adjust a line, make sure the Line Tool or Select Tool is selected, and then
position the cursor on one end of the line (marked by a circle) and drag.
Text color
Background color