Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 275)

Quantity One User Guide
C-2
To use the ChemiDoc XRS, you will need to have the Bio-Rad-supplied acquisition
board installed in your PC or Macintosh. The drivers for this board will be installed
when you install the main software application.
Make sure that your ChemiDoc XRS camera is turned on. If the camera is not turned
on, the ChemiDoc XRS acquisition window will not open.
Simulation Mode
Any of the imaging device acquisition windows can be opened in “simulation mode.”
In this mode, an acquisition window will open and the controls will appear active, but
instead of capturing real images, the window will create “dummy” images of
manufactured data.
You do not need to be connected to an imaging device to open a simulated acquisition
window. This is useful for demonstration purposes or practice scans.
To enter simulation mode, hold down the CTRL key and select the name of the device
from the File menu. The title of the acquisition window will indicate that it is
simulated.
C.1 ChemiDoc XRS Acquisition Window
To acquire images using the ChemiDoc XRS, go to the File menu and select
ChemiDoc XRS.... The acquisition window for the instrument will open, displaying a
control panel and a video display window.