Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 311)

Quantity One User Guide
E-6
Choosing Your Own Settings
If you know the filter and light source settings you want, or want to experiment with
different settings, you can choose them yourself.
Fig. E-5. GS-710 Custom Application controls.
Next to Filter, click on either the Red, Green, Blue, or White checkbox, or a
combination of two of the first three (Red-Green, Green-Blue, Red-Blue).
Fig. E-6. Examples of filter colors and applications.
Next to Light, select the appropriate light source.
• Reflective mode is for scanning opaque mediums such as dried gels on filter
paper, arrays, or photographs. The scanning dimensions in this mode are 21 cm
x
29 cm.
• Transmissive mode is for scanning transparent mediums such as films, gels, or
slides. The scanning dimensions in this mode are 20 cm
x 23 cm.
Filter Color Wavelength Application Examples
Red 595–750 nm Coomassie G-250, BCIP/NBT, Fast Green
FCF, Methylene Blue
Green 520–570 nm Coomassie R-250, Basic Fuchsin
Blue 400–530 nm Crocein Scarlet
Gray Scale 400–750 nm Silver Stains, Copper Stains, Film