Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 140)

Chapter 5. Bands
5-23
Contour Information
To display information for the selected contour, select Contour Information. A pop-
up box will show the area, total intensity, and average intensity.
Converting a Contour into a Band
When you are satisfied with the contour, select Contour to Band from the menu or
toolbar to redefine the contour as a band and assign it to the nearest lane.
Note: Before you can convert a contour into a band, you must define the lane
containing the band.
The contour boundary will change color from yellow to red, and a band line will
appear on the nearest lane.
Note: Gaussian modeling and the Plot Band command do not work on contoured
bands.
To list areas and quantities of contoured bands in reports, select the Contour Area
and Contour Qty report formatting options. Display this information on the image
using the Band Attributes dialog.
5.8.b Drawing Tools
Fig. 5-18. Drawing tools.
Density in Region
Density in Region displays intensity information for any area on an image.