Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 263)

Quantity One User Guide
B-8
Once you are satisfied with the quality of the displayed image, click on the Freeze
button to stop the exposure process. The last full exposure will be displayed in the
image window.
Fig.B-6. Freezing the manual exposure.
In Chemi mode, Manual Expose will expose an image over the specified exposure
time and then stop automatically.
Note: Freeze is automatically activated if you adjust any of the subsequent controls
(e.g., Video Print, Image Mode, Display controls, etc.).
Live Acquire
Live Acquire mode allows you to specify an interval over which a series of
progressively longer exposures are taken. All exposures are then displayed on the
screen, and you can choose the one with the best image.
Click on the Live Acquire button. A settings dialog box will open in which you can
specify the total exposure time, starting exposure time, and number of exposures.
Click on Freeze to stop
the exposure process