Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 216)

Chapter 10. Reports
10-7
Fig. 10-6. Band Type Report.
Note: This report requires band matching (see section 6.2, Band Matching).
Select the report from the Reports menu, and select the display options in the Band
Types Report Options dialog.
To save the report options, click on the Settings button in the options dialog and enter
a name for the settings in the field. To load or delete previously saved settings, click
on the button next to the Settings to Load or Delete field and select from the list of
saved settings. Then click on Load or Delete.
To display the report, click on the Report button.
This report window includes two additional options: Page Setup and Print Preview.
Page Setup Print Preview