Bio-Rad Quantity One 1-D Analysis Software - Manual (Page 358)

Appendix H. Fluor-S MAX
H-3
Fig.H-2. Fluor-S MAX acquisition window.
When the Fluor-S MAX window first opens, no image will be displayed.
The control panel has been arranged from top to bottom to guide you through the
acquisition procedure. There are four basic steps to acquiring an image using the
Fluor-S MAX:
1. Select the application.
2. Position and focus the gel or other object to be imaged.
3. Set the exposure time.
4. Acquire the image.