H 9-12 – Rice Lake 520 HMI Digital Weight Indicator Installation Manual User Manual
Page 62
Table 9-10. DIG OUT EDP Commands
Command
Description
DON#nn
Set digital output nn on (active)
DON#0
Set all digital outputs on (active)
DOFF#nn
Set digital output nn off (inactive)
DOFF#0
Set all digital outputs off (inactive)
For commands ending with “#nn”, nn is the digital output (1-4) being set on or off.
Table 9-11. DIG IN EDP Commands
Command
Description
Values
DIGIN1
DIGIN2
DIGIN3
Digital input function
OFF, ZERO, NT/GRS, TARE, UNITS, PRINT, ACCUM, DSPTAR,
ENTER, BATRUN, BATSTRT, BATPAUS, KBDLOC, HOLD, CLRCN,
GROSS, NET, PRIM, SEC, TIME, DATE, CLRTAR, CLRACC
Table 9-12. ALGOUT EDP Commands
Command
Description
Values
SOURCE1
Analog output source
GROSS, NET
OFFSET
Zero offset
0%, 20%
ERRACT
Error action
FULLSC, HOLD, ZEROSC
MIN
Minimum value tracked
0–9 999 999
MAX
Maximum value tracked
0–9 999 999
ZERO1
Zero calibration
0–99999
SPAN1
Span calibration
0–99999
EDP Commands
56