Rice Lake 520 HMI Digital Weight Indicator Installation Manual - Manual (Page 66)

Table 9-16. ASCII Translation Table for BATSTATUS Data
Translating ASCII Status Data ASCII Value Bit 3 Bit 2 Bit 1 Bit 0
Use the table at right to evaluate the ASCII character
output for bytes 3 – 12 and determine which of the
low order bits are set on.
For example, if the Digital Output Status returned in
bytes 8 – 11 is AC@@, the table at right can be used
with the bit assignments described above to
determine that digital outputs 4, 7, and 8 are active:
• A (byte 8) indicates that DIGOUT 4 (bit 0) is on
• C (byte 9) indicates that DIGOUTs 7 and 8 (bits 1
and 0) are on
• @@ indicates that bytes 10 and 11 are not used
@ 0 0 0 0
A 0 0 0 1
B 0 0 1 0
C 0 0 1 1
D 0 1 0 0
E 0 1 0 1
F 0 1 1 0
G 0 1 1 1
H 1 0 0 0
I 1 0 0 1
J 1 0 1 0
K 1 0 1 1
L 1 1 0 0
M 1 1 0 1
N 1 1 1 0
O 1 1 1 1
EDP Commands 60