Rice Lake TA Series, Rice Lake Weighing Systems - Manual (Page 17)

RL-TA Series Operation Manual 13
5 Function 1
5.1 Setting and Check
1. Call Function 1.
Press and hold the Function key for a few seconds.
When the display is changed to [
Func] , release the key.
The display switches to the Function 1 setting screen and the
first setting item [
1. Set. 1] is displayed.
(Refer to “Section 5.2: Description of Function 1” on page 16).
2. Select the next setting item.
Every time you press the Function key, you are moved one
item forward.
3. Change settings.
Pressing the Zero/Tare key toggles the right-hand value.
Choose the appropriate setting.
4. Complete the setting of functions.
Press the Target key, or press the Function key several times
until the balance enters measurement mode.
The setting of functions is completed, and the balance goes
back into measurement mode.
The setting values of Function 1 are stored after the power is turned off. Therefore, you do
not need to reenter the settings the next time the balance is used unless you wish to change
them.