11 input of id no, Select [1. 1d 1] in function 2, Display an id number – Rice Lake TA Series, Rice Lake Weighing Systems User Manual
Page 59: Start to enter an id number, Enter an id number, Save the id number, Input of id no
RL-TA Series Operation Manual 55
16.11 Input of ID No.
An ID number is used when data is printed in compliance with ISO/GLP/GMP. Set an ID number when
you print data.
When an ID number is displayed, two triangles, [] and [] are displayed in the upper left part of the
display.
You can use up to six digits in an ID number. You can use [_] (blank)
→ [0-9] → [A-F] → [ - ], which
are displayed in this order.
1.
Select [
1. 1d 1] in Function 2.
Press the Function key to display the ID number.
2.
Display an ID number.
The current ID number is displayed.*
1
3.
Start to enter an ID number.
Press the Zero/Tare key.
The leftmost digit blinks first.
4.
Enter an ID number.
Press the Zero/Tare key to change the
blinking value.
Function key to blink the next digit to the right. If
you press the Function key when the rightmost
digit is blinking, the leftmost digit blinks.
(Pressing the Print key returns the display to Step 2.)
5.
Save the ID number.
Press the Target key.
(The display switches to the next item
[
2. o.N.P.0].)
Pressing the Target key again returns the display
to measurement mode.
* If you only want to check the ID number, hold the Function key.
The display switches to the next item [
2. o.N.P.0].