2 set two limit values by entering values, Switch to the setting screen of limit values, Enter a numerical value – Rice Lake TA Series, Rice Lake Weighing Systems User Manual
Page 40: Select a number, Select a digit to enter a value, Save the lower limit
36 RL-TA Series Operation Manual
When an upper limit is saved, that value is displayed for a
while. Then the balance returns to measurement mode.
13.4.2 Set two limit values by entering values
1.
Switch to the setting screen of limit values.
Press the Target key for a few seconds.
When [
L. SEt] is displayed, release the key.
The currently saved lower limit is displayed.
2.
Enter a numerical value.
Press and hold the Zero/Tare key.
The digit furthest to the right blinks.
3.
Select a number.
Press the Zero/Tare key.
Pressing the key changes the number as
shown on the right.
4.
Select a digit to enter a value
Press the Function key.
The blinking digit shifts to the left, allowing you to set a
higher-order digit.
After a number is set, the minus sign [M] blinks.
Pressing the key again makes the digit furthest
to the right blink.
5.
Save the lower limit.
Press the Target key.
The entered lower limit value is displayed.
The next item will be then displayed.
(Continued on next page.)