6 function 2, 1 calling and setting, Call function 2 – Rice Lake TA Series, Rice Lake Weighing Systems User Manual
Page 23: Change settings, Complete the setting of functions, 2 description of function 2, Function 2, Calling and setting, Description of function 2
RL-TA Series Operation Manual 19
6 Function 2
6.1 Calling and Setting
1.
Call Function 2.
Press the Function key while holding down the Zero/Tare key.
When [
Func2] is displayed, release the key.
The display is changed to [
1. 1d 0].
2.
Change settings.
Select setting items to change with the Function key.
Change the setting in the right end with the Zero/Tare key.
3.
Complete the setting of functions.
Press the Target key, or press the Function key several times until the
balance enters measurement mode.
The setting of Function 2 is completed, and the balance goes back into
the measurement mode.
6.2 Description of Function 2
A star () denotes a factory setting.
The setting values for the items marked by an asterisk (*) are reset to factory defaults every time you call it.