Rice Lake TA Series, Rice Lake Weighing Systems User Manual
Page 50
46 RL-TA Series Operation Manual
(Pressing any key while an error message is displayed returns the display to
measurement mode.)
* When one of these messages is displayed, calibration will not be performed.
Check that you are using a proper weight, and start span adjustment or a span test again. If span adjustment
with a proper weight results in the same error message, contact our Marketing Division or Technical Service
Division.
4.
With the GLP-compatible output selected,
is displayed if span adjustment is performed,
and “Weight error” is displayed if a span test is performed while the data is being output.
While the data is being output, the balance may seem to not be moving but this does not mean it has
malfunctioned. Wait until the output is completed. (Refer to Section 18: “Using a Printer” on page 73.)