15 date and time setup, 1 time setup, Display the time – Rice Lake TA Series, Rice Lake Weighing Systems User Manual
Page 53: Set the time, Save the time, Date and time setup, Time setup
RL-TA Series Operation Manual 49
15 Date and Time Setup
15.1 Time Setup
Set the time in Hour-Minute-Second format on a 24-hour basis.
1.
Display the time.
Press the Function key for a few seconds. When
the display switches from [
Func] to [d - SEt],
release the key.
Press the Function key one time.
[
t INE] is displayed, and then the clock time is displayed.
2.
Set the time.
Press the Target key. You can change a blinking digit.
Use the Zero/Tare key to change the blinking digit.
Use the Function key to blink the next digit to the right.
If you press the Function key when the rightmost digit is blinking,
the leftmost digit blinks.
When you press the Print key before saving a time, the original time is displayed.
3.
Save the time.
Press the Target key.
The date is displayed. Press the Function key to exit the setting screen.