Cub Cadet SLTX1000 Series - Manual (Page 118)

LTX Tractors
112
5. Roll the lower drive belt out of the lower sheave of
the variable speed pulley. See Figure 6.43.
6. Unbolt variable speed pulley bracket from the tran-
saxle using a 3/8” wrench.
7. Loosen, then remove the bolts that hold the variable
speed pulley bracket to the frame using a 1/2”
wrench. See Figure 6.44.
8. Lift the variable speed pulley and bracket out of the
tractor.
9. Bench repairs:
9a. Clamp the pulley and bracket assembly into a
vise, gripping the center shaft of the variable
speed pulley.
9b. Use a 1/2” wrench to remove the pulley bolt.
See Figure 6.45.
Figure 6.43
Variable speed pulley
Bracket
bolts
Figure 6.44
Variable speed pulley
bracket bolts
Figure 6.45
Bracket
Belt keeper
Variable speed
pulley bolt