Cub Cadet SLTX1000 Series - Manual (Page 57)

Body Panels
51
3. Remove the fuel tank.
3a. Drain the fuel tank to a level that will not allow
fuel to spill.
NOTE: The tank may be drained by mechanical syphon or
by disconnecting the fuel line from the fuel filter.
3b. Remove the two screws that hold the top of the
wire form fuel tank bracket to the dash support
brackets using a 3/8” wrench. See Figure 4.38.
3c. Support the fuel tank.
3d. Remove the two screws that hold the bottom of
the wire form bracket to the dash support brack-
ets using a 3/8” wrench.
3e. Lift the fuel tank and bracket out of the tractor.
See Figure 4.39.
NOTE: The fuel line may be left connected to the fuel tank,
and the fuel tank supported next to the tractor in a
position that will not allow fuel to spill.
See Figure 4.40.
Figure 4.38
Top tank bracket mounting screw
Figure 4.39
Figure 4.40