Cub Cadet SLTX1000 Series User Manual

Page 66

Advertising
background image

LTX Tractors

60

6d.

If the tractor makes drive noise or creeps
while the pedal is in neutral, but seems to
have lost speed in just one direction (forward
or reverse):

The rod connecting the pedal bracket to the
arm on the transaxle may be bent, changing its
effective length. See Figure 5.10.

The transaxle neutral control may be out of
adjustment. See the Neutral control adjustment
section of this chapter.

7.

Check the fluid:

Unless the fluid gets contaminated, it should
last for many years with no fluid service.

Check the level and condition of the fluid: It
should be no more than 1-1/4” (3.175 cm) down
from the top of the casting. The fluid level is
generally near the bottom of the threads in the
plug hole.

Check at the socket-head plug on the casting,
NOT the plastic expansion tank. Remove the
plug using a 1/4” allen wrench.
See Figure 5.11.

The transaxle should contain 20W-50 motor oil
having a minimum API classification of SL.

If there is any reason to suspect that the fluid is contaminated, replace the fluid and monitor performance.
A second fluid change after a brief period of operation may be necessary to remove all contaminants.

If the fluid is low, there is probably a leak that needs to be found and repaired.

If the fluid is too full, it will drain into the catch tank

Figure 5.10

Drive control rod

Figure 5.11

Fill port

Expansion
tank

Advertising
This manual is related to the following products: