Cub Cadet SLTX1000 Series - Manual (Page 77)

HYDRO. DRIVE AND BRAKE SYSTEM
71
NOTE: Leaving the drive control pedal shaft loose until
after the brake rod is secured will make it easier.
15b. Position the drive control shaft and bushings,
fasten the drive control rod to it, then drive the
push cap on. See Figure 5.34.
15c. Tighten the pedal shaft support strap bolts to a
torque of 12-15 ft-lbs. (16-20 N-m).
15d. Attach the belt tensioner pulley rod.
16. Test the drive system and all safety features before
returning the tractor to service.
Figure 5.34