Cub Cadet SLTX1000 Series - Manual (Page 140)

LTX Tractors
134
16. If there is a reason to take-apart the input pinion,
use the following steps:
16a. Remove the hog-ring pulley stop by prying-
open the end gap and slipping it up the shaft.
See Figure 6.99.
16b. Use a screwdriver to pry-off the E-ring.
See Figure 6.100.
16c. Remove the shim washers. See Figure 6.101.
Figure 6.99
Hog ring
Figure 6.100
Input shaft
E-ring
Figure 6.101
Shims set end-play