Cub Cadet SLTX1000 Series - Manual (Page 59)

Body Panels
53
8. If the tractor has a separate choke cable, disconnect
it from the engine.
9. Remove the locking clip that holds the cruise control /
parking brake rod to the engagement lever assembly.
See Figure 4.44.
10. Disengage the rod from the lever assembly.
NOTE: The rod is kept in slight tension by a light spring
that hooks between the frame and the step in the
middle of the rod. See Figure 4.45.
11. Remove the screws that hold the inside mounting
ears of the dash panel to the dash support brackets
using a 3/8” wrench. See Figure 4.46.
Figure 4.44
Figure 4.45
Rod
Spring
Figure 4.46
Internal
mounting ear
Screw
Dash support
bracket