Cub Cadet SLTX1000 Series - Manual (Page 122)

LTX Tractors
116
9. On the bench, the flat-sheave idler pulley, and the
spacers used to position it can be lifted off of the
pulley bracket. See Figure 6.54.
NOTE: When installed, the head of the bolt that
holds the bracket assembly to the tractor
rests against the shouldered side of the flat-
sheave idler pulley. See Figure 6.55.
NOTE: When installed, the spacers fit against the
flat side of the flat-sheave idler pulley.
See Figure 6.56.
Figure 6.54
Bracket pivot point
Figure 6.55
Shoulder height
Figure 6.56
Flat surface
Hex bushing
Shoulder bushing
Bolt
Flat-sheave pulley
Shim