Hardy HI 6300 Series - Manual (Page 110)

100 Chapter 7
•
•
•
•
•
•
Auto Mode Tracking – Disabled (Default)
1. The displayed weight mode will remain unchanged when TARE or
ZERO is pressed.
2. To change the displayed weight mode, press the MODE button from
the front panel display
3. or send the DISPLAY MODE command over communications.
4. The ZERO command functions in both NET or GROSS mode at any
time.
Auto Mode Tracking – Enabled
1. The displayed weight mode will automatically change to NET when TARE
is pressed on the front panel display or when a TARE command is sent over
communications.