Hardy HI 6300 Series - Manual (Page 25)

Installation 17
•
•
•
•
•
•
DIN Rail Mount
Exploded View of the DIN Rail Mount Assembly
NOTE The DIN Rail mount can be used with a remote display or operated as a Blind unit
Step 1. Pull down the DIN rail clip to expose the DIN Rail bracket. Do not fully remove the
clip from the housing.
Step 2. Hook DIN rail bracket onto the DIN rail using the groove at the top of the bracket
Step 3. Push the DIN rail clip up until it locks in place.
Step 4. While holding the HI 6300 series instrument, gently pull the bottom of the HI 6300
away from the DIN rail to verify that it is mounted correctly.
Completed DIN Rail Mount Assembly